Installing a car charger skin is a relatively straightforward process. Here's a step-by-step guide to help:

What You'll Need:

• Car charger skin
• Squeegee
• Towelette
• Hairdryer or heat gun (optional)

Step-by-Step Installation:

1. Clean the Surface:

• Ensure the surface of the car charger is clean and free from dust, debris, or any residue that might affect adhesion. Using the towelette.

2. Prepare the Skin:

• Carefully peel the car charger skin from its backing, taking care not to touch the adhesive side excessively.
• Hold the skin by the edges to avoid leaving fingerprints or smudges on the adhesive.

3. Align and Apply the Skin:

• Align the skin with the car charger, ensuring it fits correctly over the surface. Take your time to position it accurately.
• Once aligned, start applying the skin from one edge to the other, using light pressure as you go. This helps prevent air bubbles from forming.

4. Smooth Out Air Bubbles:

• If air bubbles appear, gently smooth them out using a flat, soft tool like a credit card or the squeegee provided. Start from the center and push the bubbles toward the edges.

5. Optional: Apply Heat:

• If needed, use a hairdryer or heat gun on a low setting to warm the surface of the skin. This can help the adhesive bond better and conform to the charger's shape.
• Maintain a distance and move the heat source constantly to avoid overheating or damaging the skin.

6. Final Check:

• Once applied, review the skin for any remaining air bubbles or misalignments. If necessary, lift the skin slightly and reposition it carefully.

7. Let it Set:

• Allow the applied skin to set and adhere properly. Avoid using the charger for at least a few hours to ensure the adhesive has fully bonded with the surface.

Additional Tips:

• Ensure the ambient temperature is moderate when applying the skin. Extreme heat or cold might affect the adhesive's performance.
• Take your time during the installation process to ensure a smooth and accurate application.